I want to start mining Pirate Chain (ARRR)

1/2. Select a stratum server

Stratum server location	Asia
Stratum server address	piratechain.cedric-crispin.com
Port with SSL	4265 ⇒ (CPU/GPU, initial difficulty: 0.1, minimum difficulty: 0.01) 4267 ⇒ (ASIC/FGPA, initial difficulty: 128, minimum difficulty: 128) 4269 ⇒ (ASIC, initial difficulty: 1024, minimum difficulty: 1024)
Port without SSL	4264 ⇒ (CPU/GPU, initial difficulty: 0.1, minimum difficulty: 0.01) 4266 ⇒ (ASIC/FGPA, initial difficulty: 128, minimum difficulty: 128) 4268 ⇒ (ASIC, initial difficulty: 1024, minimum difficulty: 1024)
Username	<Your ARRR Wallet address>[.<Worker>] (.<Worker> is optional)
Password	x[,d=<Difficulty>] (,d=<Difficulty> is optional)

2/2. Configure a mining software

Bminer
Port with SSL	./bminer -uri stratum+ssl://RYa6MuQsYpMDp4pa975c1m9rJgRkvrZQbu.aegaeon:x@piratechain.cedric-crispin.com:4265
Port without SSL	./bminer -uri stratum://RYa6MuQsYpMDp4pa975c1m9rJgRkvrZQbu.aegaeon:x@piratechain.cedric-crispin.com:4264

Good practice

Always check if the pool latency, relative to your geographical location, is within a range of acceptance: < 300ms.

Download the open source tool: Stratum ping.

Using port with SSL

./stratum-ping -tls piratechain.cedric-crispin.com:4265
PING stratum piratechain.cedric-crispin.com (192.168.1.4) TLS port 4265
piratechain.cedric-crispin.com (192.168.1.4): seq=0, time=7.978193ms
piratechain.cedric-crispin.com (192.168.1.4): seq=1, time=1.073831ms
piratechain.cedric-crispin.com (192.168.1.4): seq=2, time=1.052141ms
piratechain.cedric-crispin.com (192.168.1.4): seq=3, time=1.10494ms
piratechain.cedric-crispin.com (192.168.1.4): seq=4, time=1.043254ms

--- piratechain.cedric-crispin.com ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 5.121688332s
min/avg/max = 1.043254ms, 2.450471ms, 7.978193ms

Using port without SSL

./stratum-ping piratechain.cedric-crispin.com:4264
PING stratum piratechain.cedric-crispin.com (192.168.1.4) port 4264
piratechain.cedric-crispin.com (192.168.1.4): seq=0, time=6.406905ms
piratechain.cedric-crispin.com (192.168.1.4): seq=1, time=692.268µs
piratechain.cedric-crispin.com (192.168.1.4): seq=2, time=1.066089ms
piratechain.cedric-crispin.com (192.168.1.4): seq=3, time=1.015254ms
piratechain.cedric-crispin.com (192.168.1.4): seq=4, time=769.342µs

--- piratechain.cedric-crispin.com ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 5.012300743s
min/avg/max = 692.268µs, 1.989971ms, 6.406905ms

I want to start mining Pirate Chain (ARRR)

1/2. Select a stratum server

2/2. Configure a mining software

Good practice

Using port with SSL

Using port without SSL

Legal notices

Resources

Pools

| | | | |

© Cédric CRISPIN 2022-2024. All rights reserved | Design: W3.CSS